Chrysler > 300 > 2008

2008 Chrysler 300 Turning Radius

Get the accurate information on the turning radius of 2008 Chrysler 300 that varies throughout the 5 trims

Shop for Products at Amazon

2008 Chrysler 300 Trims

LX 4dr Rear-wheel Drive Sedan

Turning radius - 19.4 in

It is the same for all trims.

This parameter describes the distance that the vehicle's wheels travel when making a U-turn.

Wheelbase - 120 in

It is the same for all trims.

This parameter describes the distance between the center of the front wheels and the center of the rear wheels.

Exterior length - 196.8 in

It is the same for all trims.

It is a value that describes the size of the car from the most protruding point of the front bumper to the most protruding point of the rear bumper.

Exterior body width - 74.1 in

It is the same for all trims.

This is a value that describes the size of the car from the left to the right arches.

Exterior height - 58.4 in

It is a value that describes the size of the car from the floor surface to the highest point on the roof.

Touring 4dr Rear-wheel Drive Sedan

Limited 4dr Rear-wheel Drive Sedan

Touring 4dr All-wheel Drive Sedan

Limited 4dr All-wheel Drive Sedan

Is the 2008 Chrysler 300 turning radius big?

The turning radius of your 2008 Chrysler 300 is an important peculiarity to appraise while wheeling, most notably each time converting course or parking. This particular turning radius is eminent to discern in as much as it can aid you to circumvent misadventures on the highways and parking slots.

What is thought to be a perfect turning radius for an auto? The typical number for a swell turning radius of any automobile is practically thirty four-thirty five inches (10.4-10.7 m). Commonly, conceding that your vehicle offers a puny turning radius, its ability to move is thought to be worse. What is more, always remember that a minimal turning radius would also allude that a automobile including yearmake model is less fixed while driving. So, with the condition that you are going to drive in the states with great deals of traffic or on motorways, then you need to go with the option with a higher turning radius.

In which way can you learn turning radius specs at home? Automobile fanatics can use a couple of approaches to figure the turning radius of an automobile. The most habitual as well as most straightforward step is certainly to rate directly from the middle part of the leading wheel to the backward wheel on the similarly facet. Drivers may at the same time put to work a tapeline or line gauge to check out how detached your frontal and rear wheels truly are.

A supplementary practice is to check over the 2008 Chrysler 300 wheels' turnings. With an eye to determine it, you have to look over the distance from the floor to the wheel's center and consequently carve it by two. The greater this specific angle, the shorter the turning radius would be. Take into account that these approaches will merely supply car owners a foggy conjecture of the turning radius for the personal 2008 Chrysler 300 year If you yearn to discern the perfect digit, thence browse through the manufacturer's book of instructions or our wieldy records. Simultaneously, automobilists can always seek advice of a pro, who will effortlessly assess the turning radius of your respective auto at auto service.


Chrysler 300 turning radius can be affected by the vehicle's size, and you must drive more slowly in narrow alleys with smaller radii.

Chrysler 300 of another year

Select the year